Vamos a realizar un OpenBox de esta figura histórica de la marca Scale75 que representa a un soldado de la guerra civil Americana. Como es habitual en esta marca la figura se suministra en metal blanco a escala 75mm.
Lo primero que podemos observar es la caja, bonita, robusta, con buena calidad de impresión. En el frontal encontramos una vista principal de la figura pintada de encarte, y en la parte trasera varios ángulos más de la misma figura de encarte. No hay pintura alternativa a cargo de otro pintor. Quizás se eche en falta el que no se especifique ni el escultor ni el pintor. Tampoco el ejercito o el regimiento al que pertenece la figura representada, ni el periodo; una información que para muchos profanos nos sería muy útil para buscar información antes de pintar la pieza.
Al abrir la caja podemos ver las diferentes piezas que componen el kit. Dentro de la caja vienen las piezas y dos esponjas protectoras. El kit no es especialmente complejo de montar y siguiendo las fotos de referencia la tarea es mas sencilla.
En este caso encontramos 10 piezas diferentes. Podemos ver en las fotos de detalle que el modelado es bueno, si bien el casting presenta algo de rugosidad o porosidad en alguna zona puntual. Este problema es fácilmente solucionable con un poco de putty de Tamiya diluido en acetona y aplicado con un pincel. Una vez seco, tras unos minutos, solo tendremos que pasar una lija suave y la superficie quedará pulida.
El encaje de las piezas es sencillo y bastante bueno, no presenta dificultades para el montaje, no hay que desbastar ninguna pieza ni realizar ajustes complejos, aunque en alguna zona hay que rellenar alguna unión con un poco de masilla. Un montaje agradable y que no supone nada fuera de lo normal en un montaje de tantas piezas.
Podéis ver en las fotos la figura montada y enmasillada. Algunos puntos están enmasillados para tapar los pernos exteriores, realizados después de montar la figura, me resulta más sencillo esta manera de pernar cuando el kit se compone de muchas piezas que deben encajar entre si, a pesar de que luego requiera algo más de trabajo de reparación.
Concluyendo creo que el kit es bueno, de calidad, elegante y a la vez sencillo de montar. Creo que se puede mejorar la porosidad del metal en alguna zona aunque no sea nada excepcional, en realidad son comunes en las figuras producidas en metal blanco, pero si hay posibilidad de mejorar este punto… tanto mejor! También sería interesante que incluyesen información dentro de las cajas referentes a las figuras, uniformología, etc.
Marca: Scale75
Escultor: Joaquín Palacios
Escala: 75mm
Material: metal blanco
Numero de piezas: 10
Precio venta recomendado: 48€
Relación calidad-precio: 8.5
—————————————————————————————————————————————————————————————————————————————————————————-
Today we wanna share an OpenBox of this historical figure from Scale75 of the American Civil War. As usual the miniature is casted in white metal with a size of 75 mm.
The first thing we can see is the box, pretty, robust and with good print quality. On the front we find a main view of the painted figure, and in the back we can see several views of it. No alternative painting by another artist. Maybe I missed that isn’t specifiedthe sculptor or the painter’s name. Neither the army or the regiment to which the figure represented, or even the period, a lot of information that would be very helpful to profane painters to seek information before painting the piece.
Opening the box we can see the different parts of the kit. Inside the box are two sponges to protect the pieces. The kit isn’t especially complex to assemble and following the reference photos the task is easier.
In this case we found 10 different pieces. We can see from the pictures of detail modeling is good, but the casting has some roughness or porosity in some parts. This problem is easily solved with some Tamiya putty diluted in acetone and applied with a brush. Once dry, after a few minutes, just have to apply a soft sandpaper over the surface and it’ll be smooth and polished.
The fit of the parts is simple and quite good, not difficult to mount, do not grind any parts or complex adjustments, although in some area have to fill some union with some putty. A pleasant assembled work.
You can see in the pictures the figure assembled and repaired. Some points were fixed to plug the external pins, made after assembling the figure. I find it easier this way, to pin when the kit is made up of many parts that must fit each other.
In conclusion I think the kit is good quality, elegant and simple to assemble. I think they can improve the porosity of the metal in some areas but not anything exceptional, cos’ are actually common in the figures produced in white metal, but there is potential to improve this point … the better! also would be nice to add some info about the miniature inside the box.
Brand: Scale75
Sculptor: Joaquín Palacios
Scale: 75mm
Material: white metal
Number of pieces: 10
Recommended retail price: 48€
Quality-price: 8.5
Es una de mis figuras preferidas de Scale 75
Pingback: North & South by Arsies |
Pingback: Norte y Sur |